centrifugal blower

英 [ˌsentrɪˈfjuːɡl ˈbləʊə(r)] 美 [senˈtrɪfjəɡl ˈbloʊər]

离心式鼓风机

计算机化学



双语例句

  1. Influence of Rotating Angle of Short Blade on the Performance of impeller of Centrifugal Blower with Slotted Blade
    短叶片转角对开缝叶片离心鼓风机叶轮性能的影响
  2. The dust removal centrifugal blower applies in particular in the farm machinery in the grain processing industry extremely widely.
    除尘离心风机在农业机械尤其是在粮食加工业中应用广泛。
  3. The Installation and Running Practice of GM Type Centrifugal Blower
    GM型离心鼓风机组安装及运行实践
  4. Preliminary designs were made for some of the major parts of the mower, such as the impeller of the centrifugal blower and the razor blades of the mower.
    论述了气垫式旋刀草坪修剪机的工作原理及其结构特点,对其主要组成部件中的离心风机叶轮和刀具的设计进行了初步的设计探讨。
  5. A special low noise centrifugal blower can deliver fresh air to every corner of rooms, with the guiding air outlet movable.
    专用的低噪声离心风机,导向出风可以摆动,将洁净的空气送到室内每个角落。
  6. The utility model relates to a field of centrifugal blower production, in particular to a fan impeller inclined temperature control welding table device.
    本实用新型涉及到离心鼓风机制造领域,是一种风机叶轮倾斜温控焊接台装置。
  7. Cause Analysis and Treatment of Lubricating Oil Pressure Deviated to Low Value in Centrifugal Blower
    离心鼓风机润滑油压偏低的原因分析及处理
  8. Application of centrifugal blower in sulphuric acid system
    离心鼓风机在硫酸系统中的应用
  9. The Realization of Computer Control System of Centrifugal Blower for Blast Furnace
    高炉离心式鼓风机计算机控制系统的实现
  10. Experimental Study on Noise Control of a Centrifugal Blower Using Tooth Shape Vane
    齿形叶片降低离心式风机噪声的实验研究
  11. Welding for titanium wheel of centrifugal blower and compressor
    离心鼓风机和压缩机钛合金叶轮的焊接
  12. Test Research on Fluid Prerotation at Inlet of Centrifugal Blower
    离心风机入口流体预旋的试验研究
  13. The paper introduced the anti-surging control mathematic equations of large centrifugal blower and made stability analysis of unstable characteristic curve of the blower. Some measures of relieving surge in running and switching of blowers are put forward.
    介绍了大型离心风机防喘振控制的数学方程式,提出了机组运行和切换中消除喘振的措施,对性能曲线呈驼峰状的风机进行了稳定性分析。
  14. The main characteristic of the type of GM aeration centrifugal blower is introduced.
    介绍TGM系列曝气离心鼓风机的主要特点。
  15. This Paper discusses selection principle and method for main blower of Clause sulfur recovery unit, and control way of flow rate, gives a conversion formuls of characteristic curve of centrifugal blower, puts forward several matters to which the attention must be paid in selecting main blower.
    本文论述了硫磺回收装置主风机的设计选用原则、选用方法及流量调节方式,给出了离心鼓风机的特性曲线换算公式,并提出了设计选用主风机所需注意的问题。
  16. This contribution presents the failure production of centrifugal blower in operation, analysis the reason and give the ways to solve these problems.
    本文介绍了离心式鼓风机在运行中,性能故障的产生、原因分析和处理办法。
  17. The amplication of the signal treament to measuring and analysing noises from large-size Mining Centrifugal Blower
    信号处理在矿用大型离心风机噪声测量和分析中的应用
  18. Usually interaction noise is the main noise source of a centrifugal blower, therefore the main subject of research.
    通常,离心风机的干涉噪声声是主要的噪声源,也是研究的主要对象。
  19. Study of acoustic characteristics in discrete frequency and numerical method of the gas flowing system of centrifugal blower
    离心式风机气流系统离散频率声学特性及计算方法的研究
  20. An example of rotor transformation of centrifugal blower for sulfur recovery plant is put forward.
    提出了硫磺回收装置用离心鼓风机转子的改造实例。
  21. It is very important on selection of fan for diffused aeration system in the sewage treatment plant. The principle and specialty on roots blower, multilevel centrifugal blower and centrifugal blower are analyzed, and the conclusion is drew on selection of fan in this paper.
    采用鼓风曝气工艺的污水厂的风机选型非常重要,对罗茨风机、多级离心风机和单级离心风机的原理及特点加以分析,并得出了风机选型结论。
  22. Study and practice on Noise Control of Large Centrifugal Blower
    离心鼓风机噪声治理研究与实践
  23. Failure Analysis& Countermeasure on Oil Seal of Centrifugal Blower
    离心鼓风机油封失效分析与对策
  24. Maintenance and Reconstruction for the Cooling System of Centrifugal Blower
    离心鼓风机冷却系统的维护与改造
  25. The existing heat pump system is mainly used in the drying circle system of the industries such as food processing, chemical fiber manufacturing and wood processing and the under-low specific speed centrifugal blower is one of the most important equipment in the circle system.
    现有的热泵系统主要应用于食品加工、化纤制造和木材加工等行业的干燥循环系统,而超低比转数离心鼓风机是该系统最关键的设备之一。
  26. By the test results, the design pressure ratio of five-stage centrifugal blower is 1.6.
    由试验结果可知,本系统的五级离心鼓风机的设计压比为1.6。
  27. The study focus of this paper is mainly located in the influence of blade profile and impeller width on under-low specific speed centrifugal blower.
    因此本文将主要研究焦点定位于叶片型线和叶轮宽度对超低比转数离心鼓风机性能的影响。
  28. This paper takes an industrial under-low specific speed centrifugal blower as a reference case and designs a blower model with the same parameters of flow coefficient and pressure coefficient.
    本文根据工程中现有应用比较广泛的某一超低比转数离心鼓风机,设计了一个具有同样流量系数和压升系数的风机模型进行研究。
  29. In this paper, the performance test of multi-stage centrifugal blower is carried out.
    本文对主要的五级离心鼓风机分别进行了性能试验。